Jump to content


atauf

Member Since 31 Dec 2014
Offline Last Active Feb 20 2015 08:58 PM
-----

Posts I've Made

In Topic: How to connect SD Card Breakout Board to Arduino Uno

30 January 2015 - 10:00 PM

Correct.  I just get the default error message that is built into that example sketch:

 

   "initialization failed. Things to check:"
   "is a card is inserted?"
   "Is your wiring correct?"
   "did you change the chipSelect pin to match your shield or module?"

 

My Card Settings:

 

Capacity = 7.28GB

File System: FAT32 (Default)

Allocation Unit Size: 4096 Bytes

 

 

Like I said, the breakout board is working just fine.  I'm not sure why the shield isn't working.  I wired the breakout board exactly how the sketch says it's supposed to be (which is what the shield is also supposed to be).

 

Thanks!


In Topic: How to connect SD Card Breakout Board to Arduino Uno

28 January 2015 - 10:34 PM

Thanks for the quick response.  I ended up purchasing two of the SD Card breakout board and the Ethernet shield from your website.  Right now, I have the shield set up, but my SD reader isn't initializing.  I tried both shields, and one of the breakout boards.  Not sure what's wrong, I keep researching but no good answers.  Only thing I can think of now is the SD card (8GB MicroSD HC Toshiba), but it works when I use it in a computer.

 

....

 

 

I actually just reformatted the SD card again and I got it to work when I set up the breakout board (powered the the 3.3V from the Arduino).  Thinking that the reformatting was the issue, I just hooked up the Ethernet shield again and it still won't work.