Hi
I am using USB HID Custm from mla
there is one ADC at AN0...I added another one to AN1 I did the needed modification like I put ADCON1bits.PCFG = 0b1101;
instead of ADCON1bits.PCFG = 0b1110;
and TRISAbits.TRISA1 = PIN_INPUT;
and add a variable case ADC_CHANNEL_1=1; to use it in this way
uint16_t ADC_Read10bit(ADC_CHANNEL channel)
{
uint16_t result;
switch(channel)
{
case ADC_CHANNEL_0:
break;
case ADC_CHANNEL_1:
break;
default:
return 0xFFFF;
}
ADCON0bits.CHS = channel;
ADCON0bits.GO = 1; // Start AD conversion
while(ADCON0bits.NOT_DONE); // Wait for conversion
result = ADRESH;
result <<=8;
result |= ADRESL;
return result;
}
and did modification in C# then I see that progress bar in the windows form get the value of ADC but actually now both AN0 and AN1 didnt receive the real value ...the number is just between 0 and2
what should I do




Find content
Not Telling
