I'm using the newest robotics kit. Everything works when I plug in the robot, except for the ultrasonic sensor. I've tinkered with the code for a long time now, with no luck. Eventually i just copied and pasted the final code from the guide. No luck. I've seen several people have problems with their sensors, recording objects at 0cm or up to 1000, however mine starts at 0cm, jumps immediately down to about negative 470cm, occasionally reaching and exceeding 500cm. Waving my hand in front of the sensor has no effect on the readings.
I've uploaded pictures of my electrical setup as well as a basic diagram.
Thanks in advance.
IMG_0842 (1).JPG 150.54KB
0 downloads
IMG_0843 (1).JPG 147.07KB
0 downloads
IMG_0844 (1).JPG 121.45KB
0 downloads
Screen Shot 2014-08-06 at 10.38.29 PM.png 98.11KB
0 downloads




Find content
Not Telling

