I am repurposing the robot from the Funduino UNO Robotics Kit and am going to need it to run on only 4 AA batteries. Will the robot be able to function on only 4 AA's? If so, is there a way I can use the 6 x AA Battery Holder, but only put in 4 batteries?
#2
Posted 06 March 2015 - 12:14 AM
Nope, it won't work with 4 AA batteries. The reason is that the Arduino requires an input voltage of 7-12V to operate reliably. 4 AA batteries (non-rechargeable) would only provide 6V, while rechargeable batteries would provide even less (1.2V per cell instead of 1.5V).
#3
Posted 06 March 2015 - 02:17 AM
I ended up asking this question on reddit as well... One guy offers some possible solutions, but I don't know enough about electronics to know if any of his ideas would actually work. Thoughts?
http://www.reddit.co...5qndb?context=3
#4
Posted 06 March 2015 - 05:08 PM
Yes, a boost converter would work. You'll lose a little battery lifetime and add complexity to your robot, so it would be better if you could just use all six AA batteries, but if you can only use four for some reason then a boost converter is a good solution.
As the redditer mentioned, power the motors from the battery pack and not from the output of the boost converter.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users








