Jump to content


Photo

Can the robot run on 4 AA batteries?

Robot

  • Please log in to reply
3 replies to this topic

#1 EinsteinMC

EinsteinMC

    Newbie

  • Members
  • Pip
  • 3 posts

Posted 05 March 2015 - 05:03 AM

I am repurposing the robot from the Funduino UNO Robotics Kit and am going to need it to run on only 4 AA batteries. Will the robot be able to function on only 4 AA's? If so, is there a way I can use the 6 x AA Battery Holder, but only put in 4 batteries?


  • 0

#2 Nathan House

Nathan House

    Administrator

  • Administrators
  • 122 posts
  • LocationLynchburg, VA

Posted 06 March 2015 - 12:14 AM

Nope, it won't work with 4 AA batteries. The reason is that the Arduino requires an input voltage of 7-12V to operate reliably. 4 AA batteries (non-rechargeable) would only provide 6V, while rechargeable batteries would provide even less (1.2V per cell instead of 1.5V).


  • 1

#3 EinsteinMC

EinsteinMC

    Newbie

  • Members
  • Pip
  • 3 posts

Posted 06 March 2015 - 02:17 AM

I ended up asking this question on reddit as well... One guy offers some possible solutions, but I don't know enough about electronics to know if any of his ideas would actually work. Thoughts? 

 

http://www.reddit.co...5qndb?context=3


  • 0

#4 Nathan House

Nathan House

    Administrator

  • Administrators
  • 122 posts
  • LocationLynchburg, VA

Posted 06 March 2015 - 05:08 PM

Yes, a boost converter would work. You'll lose a little battery lifetime and add complexity to your robot, so it would be better if you could just use all six AA batteries, but if you can only use four for some reason then a boost converter is a good solution.

 

As the redditer mentioned, power the motors from the battery pack and not from the output of the boost converter.


  • 0




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users