Jump to content






New Products

Posted by Nathan House, in New Products 21 July 2013 · 2,226 views

Once again, a new products post long overdue! We've added a lot of new products the last few weeks. Check them out!

USB to Serial Adaptor
Posted Image
This USB to Serial Adapter has a standard USB A connector on one end and three wires with female connectors (making them easy to plug into header pins) on the other.

Barometric Pressure Sensor (BMP180)
Posted Image
This breakout board is for the Bosch BMP180 (replaces the BMP085) high-precision digital pressure sensor. The BMP180 measures a pressure range of 300 - 1100hPa.

The BMP180 is the function compatible successor of the BMP085, a new generation of high precision digital pressure sensors for consumer applications. The ultra-low power, low voltage electronics of the BMP180 is optimized for use in mobile phones, PDAs, GPS navigation devices and outdoor equipment.

With a low altitude noise of merely 0.25m at fast conversion time, the BMP180 offers superior performance. The I2C interface allows for easy system integration with a microcontroller. The BMP180 is based on piezo-resistive technology for EMC robustness, high accuracy and linearity as well as long term stability.

5A Current Sensor (ACS712)
Posted Image
This current sensor board is based on the popular ACS712 current sensor IC. A current sensor is a great way to measure the power consumption of a system, or to detect line activity. This analog current sensor can measure up to 5A of current at a resolution of 185 mV/A.

30A Current Sensor (ACS712)
Posted Image
This current sensor board is based on the popular ACS712 current sensor IC. A current sensor is a great way to measure the power consumption of a system, or to detect line activity. This analog current sensor can measure up to 30A of current at a resolution of 100 mV/A.

Motor Shield for Arduino (L293D)
Posted Image
This motor driver shield allows you to easily control DC motors and servos from your Arduino. The shield has 2 connections for 5V servos and can drive 4 bi-directional DC motors or 2 stepper motors (unipolar or bipolar). The 4 H-Bridges are capable of providing 0.6A continuous current (1.2A peak current) at 4.5V to 25V.

This shield was originally designed by Adafruit Industries. Details and tutorials for the shield can be found on the Adafruit website, but they will not provide support for this shield as it was not manufactured by them.

Breadboard Jumper Wire Kit
Posted Image
This jumper wire contains 140 pre-formed wires ready for use in your next prototyping project! The wires come in a variety of colors and lengths and are already formed and stripped.

Sensor Shield for Arduino
Posted Image
The Sensor Shield makes it easy to connect sensors, servos, relays, buttons, potentiometers and more to your Arduino.

Leonardo Pro Micro
Posted Image



The Leonardo Pro Micro is a great little Arduino-Compatible board.


10A Two Channel Power Relay
Posted Image
A relay allows a low power device, such as a microcontroller, to control a high power device. This relay board makes it possible to control a high-current device that draws up to 10A through a 5V signal pin.

Digital Calipers
Posted Image
These digital calipers are extremely handy. They can measure object up to 6" long with a resolution of 0.001". The digital calipers can measure in inches or millimeters, with a button that allows toggling between the two easy. A hard shell, padded carrying case and extra battery are included.

Safety Glasses
Posted Image
These are just your standard safety glasses. There isn't really anything special about them, but they're comfortable and get the job done.

Funduino Uno
Posted Image
The Funduino Uno R3 is functionally identical to the the latest version of the extremely popular and easy-to-use open source Arduino Uno. The Arduino Uno R3 uses the ATmega328 microcontroller and features 14 digital I/O pins (6 may be used as PWM outputs) and 6 analog input pins. The Arduino Uno R3 can be powered through a USB connection, battery, or a wall power adaptor. This package comes with comes with a 3ft USB cable.

Funduino Mega 2560
Posted Image
The Funduino Mega 2560 is functionally identical to the extremely popular and easy-to-use open source Arduino Mega. The board is based on the ATmega2560 wich runs at 16MHz. It has 54 digital I/O pins (of which 15 provide PWM output) and 16 analog inputs. This package comes with comes with a 3ft USB cable.

  • 0



Recent Entries

Recent Comments